Products on this website are intended for adults age 21+. Please verify your age to enter.or I am Under 21
The Fujin by The Cloud Kicker Society (CKS) and Aria Built is a gorgeous, limited release 24mm hybrid mechanical mod that performs as good as it looks. The mod features a 18650 stainless steel tube coated with black, durable PVD (Physical Vapor Deposition) that showcases "Fujin," the Japanese God of Wind, in a stunning and unique two-tone matte and gloss finish.
The 24K gold-plated hybrid top cap is engraved with the serial number and has a Delrin insulator on the underside to prevent the battery from contacting metal. The switch is also plated with 24K gold and is deeply engraved with the CKS and Aria logos. It features a huge silver-plated brass contact, magnets that are epoxy coated to resist corrosion, a large Delrin battery adjustment ring, side venting channels that complement the mod's overall design, and a fixed rice pin to prevent the firing button from spinning. The switch is recessed, has a smooth positive throw, and can be fully disassembled for cleaning and maintenance. The bottom of the 24K gold-plated firing button is beautifully embossed with the Fujin's face.
The Fujin is a very hard-hitting mod with almost no voltage drop. A Delrin insulating sleeve inside the tube along with the PVD coating and top cap insulator keep the mod and your atomizer from getting hot. The Fujin combines first-class build quality, beautiful aesthetics, top performance, and thoughtfully designed safety features in an exceptional mod that you will be proud to add to your collection.
The review below showcases the Fujin 22. The Fujin 24 is exactly the same except for the larger diameter.
Features and Specifications:
CKS and Aria Built Collaboration
Stainless Steel Construction
Black PVD Exterior
Glossy Over Matte Two-Tone Rendering of Fujin Face
24K Gold-Plated 510 Hybrid Top Cap with Delrin Insulator
24K Gold-Plated Switch and Firing Button
Fujin Head Embossed on Bottom of Recessed Button
Huge Silver-Plated Brass 510 Contact
Corrosion-Resistant Epoxy-Coated Magnets
Large Delrin Battery Adjustment Ring
Single 18650 Battery
5 Side-Channel Battery Vents on Switch
1 x Fujin 24 Mech Mod
1 x Delrin Battery Insulating Sleeve
Mods with a hybrid connection are for advanced users. Please do not order this device if you are not familiar with Ohm's Law and safe battery use. If you use this mod in hybrid mode, make sure your atomizer has an adequately exposed center post. There is potential for a hard short if the center post is not longer than the outer threads. In other words, the positive connection on your atomizer must protrude beyond the outer threads (see the image below). Button top batteries are recommended but not required. Some atomizers may be too long due to the hybrid top cap. Atomizers with threaded adjustable center pins are recommended.
IMPORTANT NOTE: Mechanical mods are an ADVANCED USER PRODUCT and should NOT be used if you do not have proper knowledge of your battery's Amp limit and how to test your atomizer's resistance. With the exception of DOA WARRANTY ONLY, we do NOT offer a warranty or exchange on mechanical mods due to the nature of these products. We check every mod prior to shipping and we are NOT responsible for any parts lost by you.
Designed and manufactured in the USA by Shado Vapors, the Shado Mod is a compact high-performance mech mod with some unique features not found in any other device. From the...
Made in the USA, the Flip V3 by V3tronix is a 22mm telescopic mod with a unique, striking appearance and innovative features. If you prefer clean lines and simplicity, this...
The Ultra 24K Mech Kit, designed by Ultra Coils and manufactured by iJoy, includes the Ultra 24K Mechanical Mod and the Karat RDA. Both devices are constructed of stainless steel...