Catemizer RDA 30mm by Congrevape (Authentic)

Congrevape

If you're in the market for a 30mm RDA, the Catemizer by Congrevape will literally knock your socks off. With its spacious deck and huge post holes, any crazy build your mind can conjure can become a reality. The Catemizer is a verified performance beast that delivers colossal clouds and intense flavor.

At 6mm deep, the Catemizer's broad deck holds an ocean of e-liquid. The stainless-steel negative posts are milled into the deck, and the positive post is mounted on a PEEK insulator. Although the post holes are claimed to be 4mm in diameter, they are closer to 3mm - still wide enough to accommodate multitudes of coil configurations with large diameter wire. The standard configuration is three posts with a copper positive, but the Catemizer comes with a spare stainless single center post as well as both copper and stainless spare split center posts. So, you can set this monster up as a 3-post or 4-post deck in copper or all stainless steel. The RDA is equipped with huge copper flathead screws, but you can swap them out for the included stainless screws. The Catemizer is a paragon of versatility!

The Catemizer's "Cat Scratch" diagonal side airflow system is simply sensational. The fully adjustable 18mm wide dual air slots look like a cat scratched them out, and the turbulence created inside the chamber delivers massive vapor production. The 14mm ceramic wide bore drip tip is non-toxic, substantially heat resistant, and greatly reduces heat transfer.

The Catemizer is constructed of 304 stainless steel with C110 copper and stainless posts and an adjustable C110 copper contact pin for maximum conductivity. C110 is the purest grade (99.9%) of oxygen-free copper and more conductive than any other commercially available copper alloy.

Not for the faint of heart, the Catemizer RDA is for vapers who are ready to run with the big dogs!

Features and Specifications:
304 Stainless-Steel Construction
Fully Adjustable "Cat Scratch" Airflow
18mm Wide Air Slots
Dual Coil Builds (No Single Option)
14m Wide Bore Black Ceramic Drip Tip
Four Included Center Post Options
3mm Post Holes
Single Dual Split Positive Post in C110 Copper or Stainless Steel
Stainless Negative Posts Milled into the Deck
C110 Copper and Stainless Flathead Post Screws
6mm Deep Juice Well
PEEK Insulators
C110 Copper Contact Pin
Diameter: 30mm
Height: 44mm (including drip tip)
Weight: 74g

Package Contents:
1 x Catemizer RDA by Congrevape
1 x Preinstalled C110 Copper Single Center Post
1 x 304 Stainless Steel Single Center Post
1 x C110 Copper Dual Split Positive Post
1 x 304 Stainless Steel Dual Split Positive Post
3 x C110 Copper Flathead Screws
4 x 304 SS Flathead Screws
1 x Replacement PEEK Insulator Set
1 x Set of Extra O-Rings
1 x Screwdriver

Warning Before Purchase:
Rebuildable atomizers have known risks. They are intended for use only by ADVANCED users who have and know how to use a multimeter and who have a basic knowledge of electronics. Rebuildable atomizers cannot safely be used by inexperienced users and users who do not have the equipment necessary to test the coils they build. Rebuildable atomizers should only be used with IMR batteries. Please note the following:

  • Rebuildable coils/wicks must be tested with a meter before use. Failure to do so can cause injury to you and damage to your property.
  • If not built properly, coil/wick assemblies WILL destroy electronic devices and should always be tested first on a mechanical mod.
  • By purchasing this product, you certify that you meet all of the requirements above and that you hold harmless Roadside Vapes for any improper use of this product.




Related Items