HCigar VT75 Evolv DNA75

HCigar

The VT75 by HCigar is a beautifully designed and manufactured regulated mod that exudes quality and attention to detail. The materials, finish, chassis, buttons, battery door, 510 connection, threading -- everything about the VT75 puts it a cut above most of the competition in its price range. And in this case, function matches form because the VT75 is controlled by none other than Evolv's exceptional chip, the DNA75. Evolv's DNA chip not only provides world-class performance but, for the geek who wants to customize his or her mod down to the most minute detail, Evolv's EScribe companion software for Windows will allow you to configure your device and settings to your heart's content. Using EScribe you can download future firmware upgrades, adjust preheat settings, create a profile for each of your atomizers, customize your display and manipulate a seemingly endless menu of familiar to arcane settings. Of course, the VT75 is very easy to use and you are not required to dive into the plethora of optional settings unless you have a mind to. The VT75 is powered by a big, long-lasting high Amp 26650 battery or a smaller high Amp 18650 using the included battery adapter sleeve. (Batteries sold separately). The VT75 can fire from 1 to 75 watts, supports Ni200, Titanium and Stainless Steel wire in temperature control mode, and also utilizes a well-defined temperature coefficient of resistance (TCR) mode. A micro USB port is located on the front of the device for charging and for access to the EScribe software. The big, bright OLED screen displays all of the important details and is fully customizable. The VT75's C Frame ergonomic design makes it very comfortable to hold and easy to use. If you want to fall in love with a beautiful, high-quality, rock-solid 75W temperature control performer that will probably outlast the FDA, consider adopting an HCigar VT75! Available in all black and red with black trim.

Features and Specs:
Chipset: Heartbeat DNA75 by Evolv
C Frame Zinc Alloy Chassis
Aluminum Accenting
Three-Button Operation
Stainless Steel Buttons
Operating Wattage: 1.0 - 75.0 W
Temperature Control Mode: Ni200, Ti, SS, TCR
Temperature Control Preheat Feature
Typical Resistance (Kanthal Coil): 0.25ohm
Typical Resistance (Temperature Control Coil): 0.15ohm
Temperature Control Range: 100 - 300C / 200 - 600F
Bottom Loading Threaded Battery Cover with Adjustable Contact
Battery Cover Adjustable Screw Eliminates Battery Rattle
Requires 1 x High Amp 18650 or 26650 Battery (Sold Separately)
18650 Battery Sleeve Included
Can be Charged via USB (Micro USB Cable included)
Micro USB Port for Charging and EScribe Access
Firmware Upgradable
Removable 510 Ring
Spring Loaded 510 Pin
Large .91" OLED Display
Custom Indicator Light
Stealth Mode
Low Voltage Protection
Low Resistance Protection
Short Circuit Protection
High-Temperature Protection
Reverse Battery Protection
22mm Tank Beauty Ring Included
EScribe Software (Windows Only)
Individually Serialized
Dimensions: 89 x 52 x 32mm
Weight: 169g (without battery)

Package Contents:
1 x HCigar VT75
1 x Micro USB Cable
1 x 22mm Beauty Ring
1 x 18650 Battery Sleeve
1 x User Manual
1 x Warranty Card

Caution:
There is a small screw in the center of the screw-in battery cover that can be adjusted to eliminate battery rattle. It is important to note that this screw, and not the battery cover itself, must make contact with the battery. If you feel your mod get hot at the base, then the screw has loosened and must be adjusted so that it protrudes beyond the cover to make direct contact with the battery. We recommend that you visually inspect the screw adjustment when you change batteries. USER TIP: When removing and replacing the battery cover, hold the VT75 upside down. This will prevent the weight of the 26650 battery from unscrewing the small contact screw and the need to continually readjust it.





Related Items