KRMA RDA by Mission XV (Authentic)

Mission XV

Beautifully designed and crafted in Canada by Mission XV, the KRMA is a compact 22mm single-coil bottom-fed RDA with a classy, minimalist design and outstanding performance. The KRMA can be customized with black Delrin and stainless-steel top caps as well as ULTEM and black Delrin drip tips, all included. The 2-post deck is designed to make coil installation a breeze. It has a lead trap on one side, an open-sided terminal on the other, and guides for resting your coil-building rod. The terminals are 4mm by 1.5mm and each is held down with a clamp secured by a flathead grub screw. The juice well is 5mm deep.

The KRMA's step-down airflow system makes is very resistant to leaking and over-squonking. The top caps have dual 4mm x 1.5mm adjustable air slots positioned high on each side and airflow is directed down the interior wall and then to the side and bottom of your coil. The draw is very smooth and whistle free.

The stainless steel squonk port has a toggle screw that is stored in the base of the device. The screw can be removed with an Allen key and threaded into the squonk pin, converting the KRMA into a standard dripper. This is a nice convenience that eliminates the need to replace the entire pin.

Meticulously machined and designed to deliver exceptional flavor even with low-wattage builds, the KRMA is a high-end RDA that is sure to delight the most discriminating flavor chaser.

Features and Specifications:
Diameter: 22mm
Stainless Steel Construction
Spacious 2-Post Clamp-Style Build Deck
Clamps Secured via Flathead Grub Screws
Single Open-Sided Terminal for Easy Coil Installation
Single Coil Configuration
Coil Building Rod Guides
5mm Deep Juice Well
PEEK Insulator
4mm x 1.5mm Dual Top Adjustable Air Slots
Step-Down Airflow Design
Smooth, Quiet Airflow
Leak and Over-Squonk Resistant
Stainless Steel Top Cap
Black Delrin Top Cap
6mm Bore ULTEM and Black Delrin 510 Drip Tips
Stainless Steep BF Squonk 510 Pin
Threaded Squonk Pin Plug to Convert to a Dripper
On-Board Storage for Threaded Squonk Pin Plug
Stainless Steel 510 Connection
Individually Serialized
Height: 20mm (Not Including Drip Tip)

Package Contents:
1 x KRMA RDA by Mission XV
1 x 22mm Black Delrin Top Cap
1 x 2mm Stainless Steel Top Cap
1 x Black Delrin Drip Tip
1 x ULTEM Drip Tip
1 x Bottom-Fed Plug Screw
4 x Flathead Grub Screw Spares
4 x O-Ring Spares
1 x Allen Key

Warning Before Purchase:
Rebuildable atomizers have known risks. They are intended for use only by ADVANCED users who have and know how to use a multimeter and who have a basic knowledge of electronics. Rebuildable atomizers cannot safely be used by inexperienced users and users who do not have the equipment necessary to test the coils they build. Rebuildable atomizers should only be used with IMR batteries. Please note the following:

  • Rebuildable coils/wicks must be tested with a meter before use. Failure to do so can cause injury to you and damage to your property.
  • If not built properly, coil/wick assemblies WILL destroy electronic devices and should always be tested first on a mechanical mod.
  • By purchasing this product, you certify that you meet all of the requirements above and that you hold harmless Roadside Vapes for any improper use of this product.




Related Items