The Kick by SMOK Variable Power Module

SMOK

The SMOK Kick is a drop-in module that is designed to convert your mechanical mod into a variable power mod (5-12 watts). The Kick’s power regulation microprocessor will automatically and constantly adjust both the volt and amp levels as needed to provide consistent power output. Simply put, the Kick will allow you to increase or decrease the wattage and thereby the heat and vapor output of your atomizer. You will enjoy a consistent vape as your battery discharges and regardless of the resistance of your atomizer. The Kick also provides a number of safety measures. The Kick is designed to be used in 18650 sized metal tube mechanical devices using a 18350 or 18500 IMR battery. Some mechanical mods include an additional tube to accommodate the use of 18650 batteries with the Kick.

Built-in Safety Features:
Low voltage cut off
Low resistance cut off
Reverse battery shut off
Over heat protection

Specifications:
Compatible with most 18650 mechanical mods (metal interior, not anodized)
Mechanical mod must not have an internal diameter exceeding 19.5mm
For use with 1.5 Ohm - 6 Ohm atomizers
Maximum output 5A

How to Use (see third image on the left):
Place battery inside tube.
Set the preferred wattage on the Kick from 5W to 12W in 1W increments using a small Phillips head screwdriver.
Once set, place the Kick module with the adjustment dial facing up on top of the positive terminal of your battery.

Package Contents:
1 x SMOK Kick

NOTE:THIS DEVICE IS FOR EXPERIENCED VAPERS ONLY. PLEASE DO NOT PURCHASE UNLESS YOU ARE FAMILIAR WITH THIS PRODUCT AND ARE CERTAIN IT WILL BE COMPATIBLE WITH YOUR MECHANICAL MOD. DO NOT USE WITH SUB-OHM BUILDS AS THE KICK WILL NOT WORK. USE IMR BATTERIES ONLY.





Related Items